◆ You are here: Products & Services > Engineering Service > Test Facilities Introduction
Design Quality Assurance - Test Facilities Introduction
 |
||
Drop Tester Package drop test is applied to test the anti-vibration & covering capability of packaging material and the level of product’s impact-resisting capability regarding packaged products. |
||
| Test Height: 30~130cm Max Load: 60Kg |
||
 |
||
Vibration Tester The purpose of vibration testing is to make a series of controllable vibration simulation in lab, no matter generated by natural or man-made vibration environment; such as waves, tidal flaps, wind, earthquake, rain and so on. It is to test if the product is capable of sustaining the vibration environment exerted from transporting or usage along its effective life cycle; and certify the standard of design & functional requirement of product. |
||
| Max Force: 8000 LBF Max Load: 600 Kg Max Acceleration: 50 G Frequency Range: 1-2000 Hz Max. displacement: 2 in pk-pk |
||
 |
||
Shock Tester 1 Shock test is a kind of destructive test that helps understand product’s structural strength and anti-shock/ anti-drop characteristics, such as the surge wave environment of free drop or hit by external force. |
||
| Machine type: Free-fall Table size: 65*81cm Maximum acceleration: 600 G Pulse duration: 2~80 msec Max velocity change: 9.0m/sec |
||
 |
||
Shock Tester 2 Shock test is a kind of destructive test that helps understand product’s structural strength and anti-shock/ anti-drop characteristics, such as the surge wave environment of free drop or hit by external force. |
||
| Machine type: Free-fall Table size: 15*23cm Maximum acceleration: 2000 G Pulse duration: 0.25~60 msec Max velocity change: 8.5 m/sec |
||
 |
||
HALT Tester Highly Accelerated Life Testing is applied to identify the potential issues for the product in order to correct the defects in the early stage of product design. |
||
| Temperature range: -100~+200℃ Temperature change rate: 60℃/min Vibration range: 50Grms (2~10kHz |
||
 |
||
Wall-in Temperature and Humidity Chamber The Temperature & Humidity Chamber, which is usually set as of constant temperature and constant humidity, is facilitated to test product reliability in quantity at the same time to save the testing time or used for ESS test with respects to temperature and humidity; Besides, it is able to support dynamic testing, which requires more space, and relevant testing for products with big size. |
||
| Test space: 4.1(W)*1.9(D)*2.1(H) m Temperature range:-40~80℃ Humidity range:10~95% |
||
 |
||
Environmental Stress Screening (ESS) Chamber Environmental Stress Screening Chamber is designed to test the ultimate strength for the product by applying temperature acceleration, the process of cycling through two temperature extremes at relatively high rates of change, to change the environmental stress in order to create the inside thermal stress and strain for the product and induce the latent defects (potential component/ material defects, production defects and tooling defects) through the accelerating stress. It is to used to avoid the product failure under the environmental stress and dispensable loss, which helps to decrease the defective rate and after sales service. |
||
| Test space: 1.1(W)*0.8(D)*0.9(H) m Humidity range:10~95% Temperature range:-70~180℃ Temperature rate:10℃/min |
||
 |
||
Temperature and Humidity Chamber 1 Temperature and Humidity Chamber is used to test the product operability under the environment of high relative humidity and temperature cycle. It is to measure the limitation of temperature tolerance and the level of structural destruction induced by temperature and humidity. |
||
| Test space:1(W)*0.8(D)*1(H) m Temperature range: -40~100℃ Humidity range: 5~95%RH(10~85℃) |
||
 |
||
Temperature and Humidity Chamber 2 Temperature and Humidity Chamber is used to test the product operability under the environment of high relative humidity and temperature cycle. It is to measure the limitation of temperature tolerance and the level of structural destruction induced by temperature and humidity. |
||
| Test space:0.5(W)*0.6(D)*0.75(H) m Temperature range: -60~150℃ Humidity range: 10~98%RH(10~90℃) |
||
 |
||
Thermal Shock Tester Programmable thermal shock tester, used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment that is to test its thermal expansion and contraction caused by chemical change or physical harm within the shortest time. This test could be applied to materials, such as metal, plastic, rubber, electronics and so on, to improve their products with the testing result as reference. |
||
| Test space: 0.7(W)*0.6(D)*0.6(H) m Temperature range: -65 ℃ ~ 150 ℃ Pre-heat rate: 25 ℃ ~ 200 ℃ (45min) Pre-cool rate: 25 ℃ ~ -80 ℃ (110min) |
||
 |
||
Altitude Chamber Altitude Test Chamber combines temperature and altitude with optional humidity to test basic components or subassemblies designed for use in a variety of industries. |
||
| Test space: 1(W)*1(D)*1(H) m Temperature range: -70~180 ℃ Altitude range: 0~150,000 ft |
||
 |
||
Solar Radiation Chamber The simulation of natural sunlight is achieved using several different methods according to the range of the spectrum it is required to test, in order to check the damage caused by the differing frequencies of solar rays. |
||
| Temperature range: -20~100 ℃ Humidity range: 10%~90% R.H. Solar irradiance: 800~1200W/m2 Test space:600L |
||
 |
||
Dust Chamber Dust Chamber is to test how dust influences the product and to standardize the level of dust proof for the product. |
||
| Suction capacity:4.5 Itr/min Test space(WDH) 9509501000 mm EN60529 / IEC68-2-68 SAEJ575 / IP5X |
||
 |
||
Rain spray water Chamber Rain spray water chamber is used to test and verify the performance of cover and sealability by applying the test methods such as falling drops, impacting water or/and immersion,which is to make sure the components and equipments function well during the test and afterwards. |
||
| Dropping unit for IPX1 and IPX2 400 mm swivel tube for IPX3 and IPX4 Rotation table for DIN40050 |
||
 |
||
Salt spray Chamber The Salt Spray Tester is to test the anti-erosion quality of the surface of all materials after being treated with the rust proof painting coating electroplating/ anodizing and rust proof greasing. |
||
| Test Temp.:35℃/50℃ Test Space(WDH):1200600650mm |
||
 |
||
Acoustic Anechoic Chamber The acoustic anechoic chamber is a room in which there are no echoes. Used to test and determine the noise decibel ratings for products. |
||
| Background Noise < 16dBA Cut-off Frequency：10 Hz Sound Insulation > 50dB Natural Frequency < 10Hz |
||
